Receiver Board DMX HF V4 RGBW For Led Strip 12-24V

New board DMX HF V4 , highly sensitive , with an almost doubled receiving range !

New assignment mode , new settings ! (mode change , gamma correction , choice of channel levels on start ) 

Ouput APWM 16bits 65Khz .

This pack includes :

• board DMX HF V4 RGBW 
• antenna with standard rod
• antenna offset
• 4 wires cable.

TECHNICAL SPECIFICATIONS :

• Board provided for controlling the LEDSTRIP RGBW or any other device up to 8 amperes on 4 channels. WARNING : in order to use 8 amperes per channel,  the appropriate ground hole must be used, otherwise power is limited to 12 amperes in full.
  
• 5 DMX modes, selectable through Expert attribution mode of HF transmitters (Version >2.xd)
• mode : 4 channels DMX / 6 channels DMX with or without GAMMA correction.
• VERSION V4 of this board , signal gain >10db !! double range !
• power supply : FROM +5Volts TO +30 Volts
• cpu consumption : max 19ma for the receiver
• Dimensions : 47mm X 21mm X 12 mm
• HF sensitivity (2.4Ghz) : -100db
• Fréquency : 21
• Possible universes : 31 (15872 channels DMX)
• Delivered with a layer of 4  25cm wires for ground and power supply connection
• Protocole W2.4EC-DMX-A et B
• DMX address can be changed through transmitter (assign menu)