DMX signal board for LEDStrip Digital WS2812 and compatible.
€20.00
€16.67
In stock
SKU
DMX_TO_WS2812
DMX signal board for LEDStrip Digital WS2812 and compatible. (RGB and RGBW)
Signal output with pattern repetition to be used up to 850 pixels.
4 pixel modes X1 X2 X3 or program mode (11 channels)
- Buy 6 for €18.00 €15.00 each and save 10%
- Buy 24 for €15.00 €12.50 each and save 25%
DMX TO WS2812 (268.3KB) 
DMX signal board for LEDStrip Digital WS2812 and compatible.
Signal output with pattern repetition to be used up to 850 pixels (28m at 30L/m)
TECHNICAL SPECIFICATIONS
-
- DMX modes and address selected via dip switch.
- DMX 512 input on a 3-pin connector.
- VCC power input (led stip), +5v and ground.
- LED strip VCC output, ground and signal.
- DMX address setting on dip 1 to 9
- LED type setting : RGB or RGBW on DIP 10
- setting of pixel mode X1 X2 X3 or program mode (11 channels)
- usable with LED strip 12V.
- Power supply: from +5Volts to +24 Volts
- Module consumption: min 18 ma (without LED strip)
- Dimensions : 39mmX33mm
Write Your Own Review
