HF DMX Receiver Card V4 Player SD
Carte Player SD en DMX HF.
Enregistrez vos séquences DMX sur carte SD et jouez les directement avec la DMX HF V4 SD.
Jouer des fichiers WAV 8 Bits Mono .
Sans carte SD , vous pilotez vos leds Strip en temps réel en mode Pixels / Pixels ou avec la boite à effets intégrée
idéal pour piloter des écrans leds réalisés en WS2812 (ou compatibles) ou LPD1886
- Buy 10 for €37.00 €30.83 each and save 5%
- Buy 50 for €33.00 €27.50 each and save 15%
DMX_TOOLS (131.6KB) 
SD Player Card in DMX HF.
Record your DMX sequences on SD card and play them directly with the DMX HF V4 SD.
Ideal to drive led screens made in WS2812 (or compatible) or LPD1886.
The maximum of 32 universes is possible but the refresh rate will depend on the number of pixels controlled (for example 8 universes or 1360 pixels in WS2812 = 22 fps).
Several modes are available :
- WS2812 RGB output (sending 510 channels per universe)
- WS2812 RGBW output (sending 512 channels per universe)
- Output of a DMX 512 universe
- LPD1886 RGBWAUV output (sending 510 channels per universe)
- Selection of universes to send directly adjustable with a config file in the SD card (MODE.TXT)
- WS2812 timings selection can be modified
- program launch in 1 channel per program, or 1 channel for program selection (255)
This pack includes :
- HF DMX V4 SD card
- the standard strand antenna
- the 4-wire cable.
- nut and lock nut
- Bare card to be integrated to your machines.
- V4 VERSION of the card, extreme miniaturization and a nearly doubled range.
- Power supply: DC +5 to +20 Volts
- Power consumption: 32mA - 52mA (depending on DMX or data load)
- Frequencies: 22
- Possible universes: 31 (15872 DMX channels)
- Delivered with a 25cm 4-wire cable for ground and power supply connection and SCL and data or hot spot and cold spot connection.
- Protocol W2.4EC-DMX-A and B
Originally delivered in universe 1.
